| |
M415B Stepping Motor Driver |
 |
| Introduction |
The M415B is a very small size high performance microstepping
driver based on one of the most advanced technologies in the world
today. It is suitable for driving any 2-phase and 4-phase hybrid
stepping motors. By using advanced bipolar constant-current chopping
technique, it can output more speed and power from the same motor,
compared with traditional technologies such as L/R
drivers.
|
| Applications |
Suitable for a wide range of stepping motors of size Nema 16,
17 and 23, and usable for various kinds of machines, such as X-Y
tables, labeling machines, laser cutters, engraving machines, and
pick-place devices. Extremely suitable for applications which
expected to be low vibration, high speed and high
precision.
|
| Electronic Specifications (Tj=25℃) |
 |
| Mechanical Specifications (Unit: mm, 1 inch=25.4 mm) |
Figure 1: Mechanical
Specifications |
| Pin
Assignment and Description |
| Control Signal Connector P1
pins |
 |
| Power connector P2
pins |
 |
| Microstep Resolution Selection |
| Microstep resolution is specified by 5, 6, DIP switches as
shown in the following table: |
 |
| Current Setting |
 |
| Typical Connections |
|
(a) Connect to single-ended control signal |
 |
(b) Connect to differential signal
Figure 2:
Typical Connections |
| |
PRODUCTS